Replacing window locks repair near me RepairMyWindowsAndDoors on uPVC Door
If you're looking to change the lock on your door made of upvc, you will first need to remove the existing handle and screw holes. This is generally easy to accomplish.
The next step is to locate the screw that holds the barrel in place. The screw is typically different in colour from the other screws, and is located on the outside of the faceplate of the lock.
Remove the Cylinder
To change the lock on your upvc doors, you must first take off the cylinder that is currently in use. This is a simple process that can be done in about 30 minutes. All you require is a small screwdriver. You'll need to locate the Euro fixing screw for the cylinder, which is usually on the inside edging of the door, right next to the lock cylinder. The screw is usually a different color than the other screws and will be easy to find. Remove this screw and store it in a safe place.
Once the cylinder is removed, you can start working on removing the handle. To do this, open the door to gain full access to the inside edging of the door as well as the side of the faceplate of the lock.
Start with a screwdriver to take off the screw that is holding the handle to the door. After the screw is removed then you can pull the handle towards you, and then the rest of it out of the door.
If you're having difficulty taking the handle off of the door frame, you might have to unscrew it. You can make use of a screwdriver or a drill to remove the handle. Be careful not to cut or cross-thread it.
If you are about to replace your cylinder, be sure that it's the right size for your door. Cylinders are measured using two factors: (a), the distance from the center of the Fixing Screw to the bottom of the cylinder and (b), the distance between the keyhole's hole the keyhole and edge of the lockplate.
Remove the Handle
If your door handle made of upvc becomes stiff or loose, the good news is that it is a relatively simple issue to repair. The multipoint lock cylinder or other internal parts within the door, in between the handle and frame, are typically the reason. It is not uncommon for Upvc locks to become worn due to the weather, heavy usage or simply ageing and this can cause problems with the locking or closing mechanism of the door.
If the cylinder has been worn, it may be difficult to turn the key, and the lock could become stiff, causing the handle to drop. This can be solved by replacing the cylinder, which is a simple procedure. This can be accomplished by yourself, however you will require some understanding about how the mechanism functions. You'll need to take off the handle to be able to replace the cylinder.
To accomplish this, you'll require an screwdriver and a tape measure. You must know the dimensions of your current cylinder as it will help you in locating an appropriate replacement. The cylinder is what permits you to lock the upvc door. It is essential that you order an alternative that is exactly the same size.
To take off the old cylinder, you'll need to take off the screws that secure it. You should be careful not to remove the screws since this will make it difficult to remove the screws in the future. Once the screws have been removed, the cylinder should be able to be removed easily.
Remove the Lock Barrel
uPVC doors are constructed with extremely durable materials and are designed to ensure your home is safe and secure. They come in a wide variety of colours and styles that can suit any style of home. They are also maintenance-free and thermally efficient. They do not come without a few disadvantages. The locking point, or barrel lock, can get faulty over time and need to be replaced. This is a simple process, but there are some things you should know before beginning.
To get to the screw that holds the lock cylinder, you will have to take off your door handle. It is usually a different colour than the other screws and is located near the edge of the door, close to the keyhole. Remove the screw and place it somewhere safe. Slide the handles off both sides of the door. Do not rush to do this, as it could damage the uPVC.
After taking the handles off then, you can use a screwdriver to remove the screws that hold the handles to the door frame. This will give you better access to the pins that hold the cylinder. Then, you can play around with the device to see if the cylinder is loose. When it is loose then pull it back towards you, then pull it away from the socket.
After you have removed the old lock cylinder, it is crucial to replace it with a new one that is anti-snap as well as anti-bump security. You can do this yourself if you have the right tools, or you can engage an expert locksmith to do it for you. This is a relatively easy task that should take five minutes to complete.
Install the New Cylinder
A door lock made of upvc could be broken or damaged in a variety of ways. For instance, a tenant could have moved out but not returned the key or the cylinder may have become damaged and is no longer functioning as it should. It is important to choose the right size replacement for your door's upvc lock. This is because if an wrong lock is used, it could result in your upvc door being more vulnerable to a technique known as "lock snapping" which is the cause of 25 percent of burglaries.
It is essential to put in the proper cylinder. The process is easy and takes less than five minutes. You will require a screwdriver to take off the screws that attach to the faceplate of the handle and the cylinder. Once this is done, it is a simple job to swap them over.
Before you get started be sure that the handle is opened and that you have full access to the inside of the edging of the door as well as the side of the handle faceplate which holds the lock cylinder. This will enable you to easily remove the lock cylinder from the handle without having to move it and expose the internal parts of the frame.
Then, take out the old cylinder and determine its measurements. You'll need to know the length of the cylinder and the measurement of the cam that is used to lock or open the door. This will allow you to locate a replacement that is the same size or even smaller. This is the most crucial aspect of the entire procedure. A cylinder should be flush with the backplate of your handle and have no more than 5mm protruding from it.
Install the Handle
It is not uncommon for a upvc door lock to stop working and this could be caused by something breaking inside the case which controls the bolts that retract into the keep or strike plate. It is often resolved by adjusting the Allan key that is located beneath the hinges. However, this can sometimes cause too much stress on the components within the centre casing and it is recommended to contact an expert.
When changing the handle, it is important to have easy and quick access to both sides of the handle, as well as having the right tools. It is also a good idea to prop the door open to ensure it doesn't close during the process.
The first step is to loosen the screws that hold the handle with a screwdriver. Once these are loosened the handle can be removed. After removing the cylinder and the handle, it's now time to put in the new handle. Make sure that the new handle is compatible with your existing cylinder center and cylinder. To determine the proper size, measure the spindle length on the lever you currently own. Check that the screw fix centre on the handle is the same as the screw fix centre on your existing cylinder or hole centre.
The replacement handles from Fab and Fixed are available in a range of styles and are made to last. They are perfect for people who want to upgrade their upvc handles and increase their home security. The right handle will ensure that your house is secure and safe and won't be easy for burglars to gain entry.